Push Buttons
226Páginas

Electrical Ratings Mechanical Ratings * Performance Data — See Important- 3. fifo Allan RfoHlatf www.ab.com/catalogs Preferred availability cat. nos. are bold.

Standard Contact Ratings Maximum thermal continuous current /h 10 A AC/2.5 A DC. Bulletin 800T units with 800T-XA contacts have ratings as follows: * For applications below 24V/24 mA, PenTUFF or Logic Reed contacts are Sealed Switch Contact Ratings Maximum continuous current 7th 5 A. Bulletin 800T units have control circuit ratings with sealed switch contact blocks as follows: Stackable Sealed Switch Contact Ratings Minimum: 5V, 10 mA (digital); 24V, 1 mA (analog) Maximum continuous current 7th 2.5 A. Bulletin 800T units have control circuit ratings with sealed switch contact blocks as...

Assembled Stations Product Selection Assembled Stations Die Cast Aluminum Booted Operator - Stainless Steel Booted Operator - Glass Polyester * Boot material is chlorosulfonated polyethylene. Add suffix L to the cat. no. for station with bootless operators. Example: Cat. No. 800H-1HB4T becomes * Supplied with yellow legend plate to comply with IEC 60947-5-5 and NFPA79 E-Stop standards that require yellow background. fifo Allan RfoHlatf www.ab.com/catalogs Preferred availability cat. nos. are bold.

DeviceNet Stations DeviceNet Stations Hole Hole Hole Hole (Hole Three (Hole Three (Hole Four * Operator Types N and P from Table c must choose Color/Text option X from Table d. t Operator Types K and L from Table c may be used as Emergency Stops. To be valid as an E-Stop, the operators must use Color/Text option C from Table d and it must be placed in the last hole position in the enclosure. An E-Stop connector also must be chosen from Table e. § Enclosure Style option G from Table b can only select one operator from Table c. Valid options are K * External I/O Versions F, L, M, Q, T and U...

Emergency Stop Operators 2-Position Red Trigger Action Twist-to-Re lease, Non-Illuminated • Tamper resistant - front-of-panel mounting and non-removable operator head • Compliant with global E-stop standards, including EN ISO 13850 and EN 60947-5-5 * For finger-safe contact block terminals, add a C to the cat. no. Example: Cat. No. 800TC-TFXT6 or 800HC-TFRXT6. * To order a device with a jumbo (60 mm) plastic head add the letter J after X. Example: Cat. No. 800T-TFXJT6A or 800H-TFRXJT6A. t To order a jumbo head device with "E-STOP" printed on the cap add the letters JE after X. Example: Cat....

Emergency Stop Operators 2-Position Red Trigger Action Twist-to-Re lease, Illuminated • Tamper resistant - front-of-panel mounting and non-removable operator head • Compliant with global E-stop standards, including EN ISO 13850 and EN 60947-5-5 • LED illumination provided as standard Note: X = Closed/O = Open * For finger-safe contact block terminals, add a C to the cat. no. Example: Cat. No. 800TC-TFXTS00R or 800HC-TFRXTS00R. *To order a device with "E-STOP" printed on the cap add the letter E after J. Example: Cat. No. 800T-TFXJETQH2RA or 800H-TFRXJETQH2RA. t Operator-only supplied...

Push Button Operators Momentary Contact Push Button Devices, Non-Illuminated Flush Head Unit Extended Head Unit Booted Unit Bootless Flush Head Unit Note: Special mushroom head options only apply to mushroom head operator type code D/DR (Table c). Contact Blockfs) Sealed Switch Stackable Sealed Switch Time Delay Contacts Series C field installable kits can only be used with Series T or later operators. Adjustable range of 0.5 Snap Action Contacts Snap-action contacts feature a quick make, quick break snap- action mechanism that is only available on factory assembled units. Maximum...

Push Button Operators Momentary Contact Push Button Devices, Illuminated Extended Head Without Guard Extended Head without Guard * Includes as standard one Cat. No. 800T-XA (1 N.O. - 1 N.C.) contact block. * Operator only supplied without power module, lamp, lens cap, or contact blocks. Contact Blockfs) Logic Reed Sealed Switch Stackable Sealed Switch t Diode type dual input provides circuit isolation via opposing diodes. Not recommended for use with solid-state outputs. >- Dual input diode only. www.ab.com/catalogs Preferred availability cat. nos. are bold. dTt\ an., JI-..

Push Button Operators Momentary Contact Push Button Devices, Non-Illuminated —With Two-Color Molded Legend Caps Operator Only • Less contact blocks Legend Caps cannot be stacked upon, but can stack upon other contact blocks. www.ab.com/catalogs Preferred availability cat. nos. are bold.

Selector Switches 2-Position Selector Switch Devices, Non-Illuminated Standard Knob Operator Knob Lever Operator Standard Knob Operator Note: X = Closed/O = Open * Target tables are reversed from those shown. * One insert of each color (blue, green, orange, red, and yellow). } Target tables are reversed from those shown. § Only available on Bui. 800T, Type 4/13 operators. * Contact target tables same as those listed for standard contact blocks. www.ab.com/catalogs Preferred availability cat. nos. are

Selector Switches 2-Position Selector Switch Devices, Non-Illuminated (Bui. 800T only) 2-Position Cylinder Lock Operator Note: X = Closed/O = Open * Target tables are reversed from those shown. * Keys removable from maintained positions only. § Contact target tables same as those listed for standard and PenTUFF contact blocks. * Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See page 10-46 for additional replacement key numbers. www.ab.com/catalogs Preferred availability cat. nos. are bold.

Selector Switches 3-Position Selector Switch Devices, Non-Illuminated Standard Knob Operator Knob Lever Operator Standard Knob Operator Note: X = Closed/O = Open Table 1. Cam and Contact Block Functionality Table One insert of each color (blue, green, orange, red, and yellow). * Only available on Bui. 800T, Type consult your local distributor. Not available with wing levers. www.ab.com/catalogs Preferred availability cat. nos. are bold.