Electronic Applications Division More than 30,000 individuals of 0.18 x 0.38 mm on one substrate RoHS COMPLIA Lasering – go for highest precision CeramTec has over 35 years experience in laser machining and is one of the largest laser-houses worldwide. Computer-controlled CO2- and YAG-lasers are used for scribing, cutting and drilling substrates to extremely small tolerances. CeramTec’s lasering-capabilities: • high dimensional accuracy • fast deliveries • economical for small and large volumes • fast design changes on demand • complex geometries • flexibility for samples and prototyping • drilling for through-hole metalization, • smallest cut-outs and diameters, • double shots on crossing points, • individual laser pitch and depth within the same scribe-line. CeramTec options for edge finishing: • as lasered • Edge treated • Perfect Edge

Lasering – go for highest precision standard Dimensions Thicknesses for lasered substrates S pecial formats and thicknesses available on request. Tolerances for lasered substrates Standard length an width a t nominal thickness + 0.20 mm Յ 0.635 mm -0.05 mm + 0.25 mm +0.15 mm Ͼ 0.635 mm -0.05 mm -0.05 mm Յ 0.76 mm + 0.30 mm Ͼ 0.76 mm -0.10 mm Յ 1.27 mm Distance from edge to snap-line/hole center at nominal thickness Յ 0.635 mm Lasered substrates Edge finishing: Ͼ 0.635 mm Յ 0.76 mm Ͼ 0.76 mm Յ 1.27 mm Distances between snap-lines/hole center hole diameter at nominal thickness Յ 0.63 mm: Ø Յ...