3CX ECO
8Páginas

{{requestButtons}}

Extractos del catálogo

3CX ECO - 1

STATIC DIMENSIONS J ­ CB Backhoe Loaders feature heavy duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key. Machine model Machine model A Total travel length H Total travel clearance B Axle centreline distance J Rear frame width C Slew centre to rear axle centre distance D Stabiliser feet clearance F Steering wheel centre height * Narrow option

Abrir la página 1 del catálogo
3CX ECO - 2

STATIC DIMENSIONS JCB Backhoe Loaders feature heavy duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key. Machine model Machine model A Total travel length B Axle centreline distance C Slew centre to rear axle centre distance H Total travel clearance D Stabiliser feet clearance J Rear frame width F Steering wheel centre height

Abrir la página 2 del catálogo
3CX ECO - 3

GROUND LINE ANGLES ENGINE (Stage IIIb Emissions) The JCB Ecomax engine is so efficient that it complies with Stage IIIb/Tier 4i without the need for exhaust after-treatment systems; Diesel Particulate Filter (DPF) or Selective Catalytic Reduction (SCR). This is because its high pressure common rail combustion system, produces virtually no particulate matter in its exhaust gases. 3CX Super, 3CX Super Sitemaster A Approach angle 74° B Interference angle/ramp to ground plane 118° C Departure angle 19° High Pressure Common Rail Fuel Injection – Injects fuel at high pressure, up to 2000 bar,...

Abrir la página 3 del catálogo
3CX ECO - 4

REAR AXLE The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. They feature synchronised shifting in all gears. Powershuttle between forward and reverse. Ground speeds are designed to maximise productivity. Optional JCB 6-speed autoshift transmission features automatic upshift and downshift between 4th, 5th and 6th gear controlled by machine travel speed and incorporates a kickdown pedal to select first gear. The operator may use the Autoshift in manual mode when operator control of shift points is desired. The JCB Powershift transmission allows fast gear...

Abrir la página 4 del catálogo
3CX ECO - 5

SERVICE CAPACITIES All models Machine model Cooling system Fuel tank N Load over height Engine oil with filter O Loader hinge pin height Gearbox with filter Rear axle Q Reach at ground (toe plate horizontal) Front drive axle R Max. reach at full height Hydraulic system incl. tank S Reach at full height fully dumped U Roll back at ground OPTIONAL ACCESSORIES Key/keypad immobiliser, Sitemaster, Michelin or Goodyear Brands of tyres with a selection of traction/industrial tread in a crossply/ radial construction, Powershift/Autoshift transmissions, JCB TorqueLock, JCB Powerslide, Standard...

Abrir la página 5 del catálogo
3CX ECO - 6

LOADER PERFORMANCE LOADER DIMENSIONS – Forklift Performance Data – 3CX, 3CX Contractor, 3CX Sitemaster 3CX 3CX Shovel type Loader breakout – shovel Loader breakout – arms Rated operating capacity 7’4”* Rated operating capacity 7’8”* Clamping force 3CX Sitemaster, 3CX  Contractor (Standard lift) 3CX Super Shovel type Loader breakout – shovel Loader breakout – arms Max. lift capacity 7’4” Max. lift capacity 7’8” Clamping force *Rated operating capacity as determined according to ISO 14397 : 2007. LOADER ATTACHMENTS – Direct Mount – All models Loader buckets are listed according to size and...

Abrir la página 6 del catálogo
3CX ECO - 7

Model 3CX Standard Dipper m Ext – A SAE max dig depth Ret 4.24 Ext – SAE 2ft flat bottom Ret 4.21 Ext – Maximum dig depth with deep profile bucket Ret 4.75 Ext – B Reach – ground level to rear wheel centre Ret 6.72 Ext – C Reach – ground level to slew centre Ret 5.37 Ext – D Reach – at full height to slew centre Ret 2.74 Ext – E Side reach – to centre line of machine Ret 5.94 Ext – F SAE operating height Ret 5.53 Ext – G Maximum loadover height Ret 3.84 Ext – SAE loadover height Ret 3.4 H Total kingpost travel 1.16 Narrow rear frame option 1.05 J Bucket rotation Speed 201° BACKHOE...

Abrir la página 7 del catálogo
3CX ECO - 8

BACKHOE PERFORMANCE – 3CX, 3CX Sitemaster, 3CX Super, 3CX Super Sitemaster Speed Bucket tearout Power Ext Dipper tearout Ret Ext Lift capacity of bucket pivot at full reach Ret * Including sidecutters. Width less sidecutters deduct 25mm (1in). † Capacity in cu.yd. BACKHOE PERFORMANCE – 3CX Contractor Speed Bucket tearout Power Ext Dipper tearout – standard lift excavator Ret Ext Dipper tearout – heavy lift excavator Ret Lift capacity of bucket pivot at Ext Full reach – standard lift excavator Ret Lift capacity of bucket pivot at full reach – Ext heavy lift excavator Ret BACKHOE ATTACHMENTS...

Abrir la página 8 del catálogo

Todos los catálogos y folletos técnicos JCB

  1. Wheel-Loaders-406

    16 Páginas

  2. 4cx ECO

    24 Páginas

  3. RANGE BROCHURE

    20 Páginas

  4. GAMA JCB TELETRUK

    24 Páginas

  5. VMD70/100

    6 Páginas

  6. Dumpsters:HTD5

    6 Páginas

  7. El Lince De JCB

    16 Páginas

  8. Site Dumper Range

    12 Páginas

  9. 3230 XTRA FST

    44 Páginas

  10. 5CX WASTEMASTER

    28 Páginas

  11. ELECTRIC SCISSORS

    16 Páginas

  12. 3CX Pothole Master

    16 Páginas

  13. WORKMAX 800 D

    12 Páginas

  14. CONSTRUCTION RANGE

    44 Páginas

  15. Mini Excavator

    28 Páginas

  16. VIBROMAX | VMT160

    16 Páginas

  17. 2CX

    20 Páginas

  18. 1CX

    24 Páginas

  19. telescopic range

    24 Páginas

  20. 1167

    28 Páginas

  21. Excavator range

    20 Páginas

  22. ADT range

    16 Páginas

  23. FASTRAC BROCHURE

    36 Páginas

  24. Workmax Brochure

    24 Páginas

Catálogos archivados

  1. JCB COMPACTACIÓN

    24 Páginas

  2. SNOW BROCHURE

    12 Páginas