Williams V Dual Seal #30950
12Páginas

{{requestButtons}}

Extractos del catálogo

Williams V Dual Seal #30950 - 1

ERIESOF ERIESOF ETERING ETERING UMPS UMPS Committed to Delivering Fluid Metering Products, Services & Technology of the Highest Quality, and To Always Exceed Our Customers Expectations. Committed to Delivering Fluid Metering Products, Services & Technology of the Highest Quality, and To Always Exceed Our CustomerҒs Expectations. EETS EETS

Abrir la página 1 del catálogo
Williams V Dual Seal #30950 - 3

NOTE:The normal cracking pressure of the discharge check valve is 90 PSI. NOTE:The flow turndown ratio is defined as the total flow range of the pump, which includes both speed and stroke length adjustments.

Abrir la página 3 del catálogo
Williams V Dual Seal #30950 - 4

A) Use The Following Performance Flow Curves* in Order To: Step 3: From step 1 convert your actual flow to cc/min.1gallon 1) Determine the flow capability of the pump you have selected. If you have sized the pump too close to the upper or lower stroke rate limit,you may wish to change to a different pump size.Of course you can also change your flow for a given stroke rate by adjusting the stroke length.Example: x3785 cc x 1 day x1 hr =2.628 cc day gallon 24 hrs 60 min minNow divide 2.6 cc/min by the answer in step 2.2.6cc Example: Application:1 gallon per day @ 3000 psi Step 1: > 1 gallon...

Abrir la página 4 del catálogo
Williams V Dual Seal #30950 - 8

CR Ceramic Between Sapphire and Diamond Excellent Chemical Inertness in on the Mohs Scale all Acids,Bases,SolventsA17-4 ph40 RcGeneral Corrosion-resistant Stainless Steel Limited Acid ResistanceB316 SS28 RcExcellent Corrosion-resistantStainless Steel Limited Acid ResistanceWe recommend the use of ceramic because of its extreme hardness and excellent chemical inertness. > The seal material must be chosen to satisfy both the chemical compatibility and the pressures/temperatures at which you are operating.Below is a general guideline for seal material selection. > TG Mechanical-30 to...

Abrir la página 8 del catálogo
Williams V Dual Seal #30950 - 9

NOTE: > (1) The 400,600 and 800 motor cylinders are only available with the CR (controller-relay) or SR (solenoid-relay) control methods. > (2) An aluminum pneumatic section version of the pump can be specified by replacing the VӔwith an XӔ.The XӔseries is onlyavailable in the P125X,P250X,P500X and P750X models. >

Abrir la página 9 del catálogo

Todos los catálogos y folletos técnicos Williams Milton Roy

  1. 31049 MKVII PL RK

    1 Páginas

  2. 30956 V Series

    32 Páginas

  3. P2250 Parts List

    1 Páginas

  4. PCV125-AL

    1 Páginas

  5. APU-XP

    1 Páginas

  6. W Series Pump IOM

    25 Páginas

  7. MKXII Controller

    2 Páginas

  8. Wilroy Brochure

    6 Páginas

  9. V series Brochure

    12 Páginas

  10. W-Series Brochure

    8 Páginas

  11. Conversion Kit

    4 Páginas

  12. Wilroy IOM

    20 Páginas

Catálogos archivados